Safety Factor (SF) according to ISO 21898:2004
|
|
30% more volumeOptimized transport loading with up to 30% more volume for your product. Can be packed in an ISO container or truck to avoid valuable lost load space.
|
![]() |
Standard BaffleWoven polypropylene panels with strategically located windows to allow the free flow of product during the fill and discharge. |
![]() |
Net BaffleThe Net Baffle format, consists of a continuous polypropylene yarn.This design allows an increased flow of product. |
![]() |
Extruded Net Baffle*The extruded net format, promotes increased flow of product and can be incorporated into an inner liner. |
![]() |
Greif Type D – StatGuarD
|
Greif Type C –Conductive FIBC
|
Type D FIBCs are made from
|
Conductive yarn is woven into the
|
antistatic fabric with dissipative
|
fabric creating a fully interconnected
|
threads. Static charges are dissipated
|
grid with a resistance to groundable
|
at low energy levels by the corona effect,
|
point of less than 1,0 x10^7Ohm with
|
grounding is not required
|
breakdown voltage of less than 6kV.
|
|
Conductive tabs are added to the FIBC to allow
|
|
grounding during filling and discharging.
|
|
Effective grounding is critical forsafe application. |
Requirements:
|
TYPE B
|
TYPE C
|
TYPE D
|
Need for FIBC grounding & special handling equipment
|
NO
|
YES
|
NO
|
Compliance with EC 10/2011 & FDA food contact regulation
|
YES
|
YES
|
YES
|
Possibility to control the FIBC with metal detection
|
YES
|
NO
|
YES
|
Dissipation of static charge via Unique built in characteristics
|
NO
|
NO
|
YES
|